KINETICS® Ultra Quiet SR
High Performance Sound Rated Floor System
Kinetics Ultra Quiet SR Floorboard is a high performance continuous underlayment material which substantially reduces impact noise transmission through hard surface floor systems. Lab Ratings of IIC (Impact Insulation Class) approaching 60 are possible in typical applications, compared with IIC-25 to 34 with conventional construction.
Ultra Quiet SR Floorboard is a new concept in the control of noise in condominiums, apartments, multi-family dwellings, commercial buildings, and other areas where footfall and impact noise can be the cause of occupant complaints.
Ultra Quiet SR Floorboard is a 1 inch (25 mm) thick composite of high density molded glass fibers separated by a rigid phenolic-treated honeycomb core.
- Withstands live loads up to 1000 psf
- Maintains strength even when wet
- Cuts easily with standard construction knife
- Very lightweight, easy to handle and install
- Approved for use with gypsum concrete, standard concrete, and built up wood floors
- Greater noise control than typical 1/4 to 1/2 inch sound control mats
- Combines high resilience and sound absorption in a single layer
- Outperforms dimpled rubber underlayments
- Size 4 feet by 8 feet
- Thickness 1 inch
- Nominal Weight 12 lbs / sheet
Many occupants have a preference for hard surface floors such as ceramic tile, quarry tile, marble, hardwood flooring, engineered floors, or vinyl tile. Without carpeting to cushion footfalls, impact noise will be heard clearly in the occupied spaces below.
Many localities have adopted building codes which require minimum IIC and STC ratings for floor/ceiling systems. An IIC of 50 or less will result in disturbing impact sounds below. With an IIC of 50 to 60, certain sounds may be audible in the spaces below. Acousticians familiar with noise issues in high end condominium buildings often recommend a lab tested assembly with ratings in the 55 to 60 range to minimize occupant complaints.
Ultra Quiet SR Floorboard is used where more typical 1/4" to 1/2" sound control mats do not provide the necessary sound reduction. This 1-inch thick resilient layer dramatically improves impact (IIC) noise ratings through the floor assembly while increasing the STC rating for airborne noise as well.
For use with either wood frame or concrete structural floors, Ultra Quiet SR Floorboard can be installed with a reinforced mortar bed, gypsum concrete, or a poured concrete slab.