KINETICS®Equipment Yard Noise Barrier Walls and Acoustic Louvers


Owner of an Olympic size, velodrome training facility (a velodrome is an indoor arena for high speed, track cycling consisting of steeply banked oval tracks consisting of two (2), 180-degree circular, steeply banked bends connected by two (2) straights).


  • The originally designed, concrete block, outdoor, equipment yard barrier was designed with no attention to acoustics.
  • The project was well underway, in fact, the mechanical equipment was already installed and operating in the yard, when the owner became concerned about the noise emanating from the yard to the velodrome entrance as well as to the surrounding residential neighborhood.
  • The architect wanted the acoustical consultant to determine how much higher the existing concrete block wall should be and then increase it by using additional concrete block.
  • Increasing the wall height would introduce the need for attenuated ventilation as well as sound absorption and sound transmission loss (blocking).

This case study features Kinetics NOISEBLOCK™ Sound Barrier Walls and Acoustical Louvers

Additional Information
For additional information email

Project Images


  • The acoustical consultant had much experience using Kinetics Noise Control, Inc. (KNC) products and services and contacted KNC's local representative.
  • The KNC representative and in-house engineer visited the site to finalize submittals with the contractor and confirm existing noise levels.
  • The equipment yard was configured with pumps and transformers at one end and air handling units (AHU's) at the other. A composite wall, consisting of NOISEBLOCK™ solid barrier wall panels and the balance consisting of similarly performing model KCAL, fixedblade acoustic louvers allowed for the air requirements of the AHU's.

Advantages of Proposed Solution

  • NOISEBLOCK™ barrier walls are easily designed to any required wind and seismic loads.
  • The Kinetics Noise Control, Inc. (KNC) engineering team and representative are experienced with working with acoustical consultants, owner and community representatives.
  • KNC specializes in the manufacture of NOISEBLOCK™ barrier walls and acoustic louvers, thus ensuring the client noise reduction goals and met.


  • Environmental noise issue
  • Large concrete block equipment yard
  • Time constraints
  • Continuous operation
  • The noise barrier wall must be designed as free standing without knee braces
  • Existing concrete block wall cannot withstand additional external loading
  • Low pressure drop but high attenuation requirement

Project Goals

  • Meet the imposed time constraints
  • Reduce the noise levels to within acceptable levels for community and patrons

NOISEBLOCK™ Applied Products

KNC model STL-4, NOISEBLOCK™ barrier panels were manufactured of 16 gage solid outer skin and 22 gage, perforated inner skin with acoustic grade fill suitable for outdoor exposure, all material galvanized steel, Type G90. The tongue and groove panel connections allowed for quick installation and inherent drainage of rain water. The structural steel components were supplied as assemblies with a factory hot-dipped, galvanized finish. All products are cost effective and backed by KNC’s extensive, independently tested database and proven performance.

KNC model KCAL/2, 6-inch deep acoustic louvers were used for the balance. The structural steel support system was designed to readily accept the louvers similar to the method used to install the NOISEBLOCK™ barrier panels. This common attachment methodology made efficient for the installer to complete the project. Since the existing wall could not support the reaction forces of the base plates if mounted on top, the structural steel columns were designed to run behind the wall up from grade.

The final barrier dimensions were 162'-0" L x 31'-0" W x 6'-6" H extension.


The installed sound barrier wall yielded the necessary 12 dBA sound reduction. This was perceived by the residential neighbors and surrounding patrons as sounding half as loud as the untreated noise. Proper air allowed for proper equipment operation. The time-line was met. The architect and acoustical consultant praised the work and highly recommend KNC for future projects.